Influence of the food plants on the degree of parasitism of larvae ofHeliothis armigera byCotesia kazak

Influence of the food plants ofHeliothis armigera (Hb.) on the degree of parasitism by exotic parasiteCotesia kazak Telenga (Hymenoptera: Braconidae) was studied in cages in the laboratory on 7 food plants such as cotton (Gossypium hirsutum L.), tomato (Lycopersicon esculentum Mill), okra [Abelmoschus esculentus (L.) Moench], Dolichos (dolichos lablab L.), pigeonpea [Cajanus cajan (L.) Millsp.], Cowpea (Vigna unquiculata (L.) and chickpea (Cicer arietium L.). To determine the preference of the parasite 2 test methods were employed. In single plant choice test cotton was most preferred. Next in order of preference were tomato and okra. Dolichos, pigeonpea, cowpea and chickpea were least preferred. In multiple choice test, however, cotton and okra were preferred followed by tomato. Parasites were seen visiting these plants very frequently and high parasitism was recorded on these plants. Chick pea, pigeon pea, cowpea and Dolichos were the least preferred food plants. There appears to be some difference in fecundity as affected by some food plants. Exposure on okra, cotton and tomato resulted in higher cocoon production as compared to pigeonpea, Dolichos, cowpea and chickpea. There was, however, no difference in sex-ratio and longevity of the progeny as affected by food plants. This exotic parasite should be released first in crops such as cotton, okra and tomato on whichH. armigera is a very serious pest in India and elsewhere. Contribution No. 140/86 of the Indian institute of Horticultural Research, Bangalore-560 089     

Vegetation patterns on Mount Everest as influenced by monsoon and föhn

The vegetation of Mt Everest is described by means of the dominant plant formations and characteristic features of biotopes. Climatic data givenin connection with weather observations show evidence that the extreme asymmetry of the altitudinal vegetation belt on the south and north slope is induced by heavy rainfall on the south slope and the desiccating effect of the Himalaya föhn in the valleys of the north slope. Biotope shift from hypsozonal distribution on the south slope to extrazonal distribution on the north slope is described, the patterns of the actual timber line are discussed in order to reconstruct the natural upper forest limit, and regressive plant successions during the last 400 years of man's impact are summarized. The dominant vegetation pattern of the alpine belt is compared with that in the European Alps. On the arid north slope alpine steppe communities occur up to 5 500 m. The highest altitudinal vegetation belt and the highest plant communities at 5 960 m are dominated by periglacial processes. The highest records of flowering plants (6 100/6 200 m) and lichens (7 400 m) are discussed in light of the present knowledge on high-altitude vegetation ecology.     

Transformation and regeneration of Brassica rapa using Agrobacterium tumefaciens

Summary Transformation and regeneration procedures for obtaining transgenic Brassica rapa ssp. oleifera plants are described. Regeneration frequencies were increasedby using silver nitrate and by adjusting the duration of exposure to 2,4-D. For transformation, Agrobacterium tumefaciens strain EHA101 containing a binary plasmid with the neomycin phosphotransferase gene (NPT II) and the b-glucuronidase gene (GUS) was cocultivated with hypocotyl explants from the oilseed B. rapa cvs. Tobin and Emma. Transformed plants were obtained within three months of cocultivation. Transformation frequencies for the cultivars Tobin and Emma were 1–9%. Evidence for transformation was shown by NPT II dot blot assay, the GUS fluorometric assay, Southern analysis, and segregation of the kanamycin-resistance trait in the progeny. The transformation and regeneration procedure described here has been used routinely to transform two cultivars of B. rapa and 18 cultivars of B. napus.     

Germination ecology of coastal plants in relation to salt environment

Responses of seed germination to salinity were examined using 37 species collected from salt marshes, cliffs, and fore (unstable) and hind (stable) sand dunes along Japanese coasts. For comparison, seed germination of nine inland species was also examined. The soil salinities in salt marshes ranged from 150 to 300 mmol/L NaCl, whereas those in fore and hind dunes ranged from 0 to 150 mmol/L NaCl, with a few exceptions. Cliff soils showed relatively high salinities up to 300 mmol/L NaCl. Ciff and foredune soils that encountered a typhoon and storm showed high salinities >300 mmol/L NaCl. Salt tolerance in seed germination of coastal plants was ordered by comparing the responses of percentage and rate of germination to salinity conditions up to 200 mmol/L NaCl, being in the order of salt marsh>cliff>foredune≅hind dune≅inland. Thse results indicate that salt tolerance in seed germination of coastal plants is closely related to the salinity conditions of their habitats. Germination experiments under favorable conditions showed that a high percentage of the seeds of salt marsh species germinate rapidly, those of diff species germinate slowly and those of foredune species exhibit a low percentage and low rate of germination. It seems that these germination characteristics contribute to the success of germination at the ‘safe site’ and the subsequent survivorship of emerged plants in their natural habitats.     

Stochastic simulation of clonal growth in the tall goldenrod,Solidago altissima

Summary As clonal plants grow they move through space. The movement patterns that result can be complex and difficult to interpret without the aid of models. We developed a stochastic simulation model of clonal growth in the tall goldenrod, Solidago altissima. Our model was calibrated with field data on the clonal expansion of both seedlings and established clones, and model assumptions were verified by statistical analyses.When simulations were based on empirical distributions with long rhizome lengths, there was greater dispersal, less leaf overlap, and less spatial aggregation than when simulations were based on distributions with comparatively short rhizome lengths. For the field data that we utilized, variation in rhizome lengths had a greater effect than variation for either branching angles or rhizome initiation points (see text). We also found that observed patterns of clonal growth in S. altissima did not cause the formation of fairy rings. However, simulations with an artificial distribution of branching angles demonstrate that fairy rings can result solely from a plant's clonal morphology.Stochastic simulation models that incorporated variation in rhizome lengths, branching angles, and rhizome initiation points produced greater dispersal and less leaf overlap than deterministic models. Thus, variation for clonal growth parameters may increase the efficiency of substrate exploration by increasing the area covered and by decreasing the potential for intraclonal competition. We also demonstrated that ramet displacements were slightly, but consistently lower in stochastic simulation models than in random-walk models. This difference was due to the incorporation of details on rhizome bud initiation into stochastic simulation models, but not random-walk models. We discuss the advantages and disadvantages of deterministic, stochastic simulation, and random-walk models of clonal growth.     

The utilization of nitrogen from insect capture by different growth forms of Drosera from Southwest Australia

Summary Plants of Drosera species, neighbouring noncarnivorous plants, and arthropods on or near each Drosera sp. were collected at 11 contrasting habitat locations in SW Australia. At three of the sites clones of the rare glandless mutant form of D. erythrorhiza were collected alongside fully glandular counterparts. The ¹⁵N value (¹⁵N/¹⁴N natural isotope composition) of insect-free leaf and stem fractions was measured, and the data then used to estimate proportional dependence on insect N (%N_dI) for the respective species and growth forms of Drosera. The data indicated lower %N_dI values for rosette than for self-supporting erect or for climbing vine species. The latter two groups showed an average %N_dI value close to 50%. The %N_dI increased with length and biomass of climbing but not erect forms of Drosera. ¹⁵N values of stems were positively correlated with corresponding values for leaves of Drosera. Leaf material was on average significantly more ¹⁵N enriched than stems, possibly due to delayed transport of recent insect-derived N, or to discrimination against ¹⁵N in transfer from leaf to the rest of the plant. The comparison of ¹⁵N values of insects and arthropod prey, glandless and glandular plants of D. erythrorhiza indicated %N_dI values of 14.3, 12.2 and 32.2 at the respective sites, while matching comparisons based on ¹⁵N of insect, reference plants and glandular plants proved less definitive, with only one site recording a positive %N_dI (value of 10.4%) despite evidence at all sites of feeding on insects by the glandular plants. The use of the ¹⁵N technique for studying nutrition of carnivorous species and the ecological significance of insect feeding of different growth forms of Drosera growing in a large range of habitats is discussed.     

Comparative studies of nickel,cobalt, and copper uptake by some nickel hyperaccumulators of the genus Alyssum

The uptake of Ni, Co, and Cu by the nickel hyperaccumulator Alyssum troodii Boiss and the non-accumulator Aurinia saxatilis (L.) Desv. were studied in pot trials using artificial rooting media with varying concentrations of the metals added as soluble salts, singly and in combination. The ability of five other Ni hyperaccumulating species of Alyssum to hyperaccumulate Co was also investigated.Leaves and stems of A. troodii accumulated Ni to almost the same extent (8000–10 000 g g^-1). In roots, the highest Ni concentration was 2000 g g^-1. In leaves of Au. saxatilis, the maximum Ni concentration was only 380 g g^-1 and the level in roots was even lower.In media containing Co, the maximum concentration of this element in A. troodii (2325 g g^-1) was ten times higher than in the non-accumulator species. Slightly less Co was found in stems and roots of both species. Among the other Ni hyperaccumulators, the maximum concentration of Co in leaves ranged from about 1000–8000 g g^-1.Copper concentrations were the same in all organs of both species when they were grown in copper-rich media and were in the range 40–80 g g^-1, showing that neither plant was capable of taking up Cu at levels comparable to those of Ni and Co.When both plants were grown in media containing equal amounts of both Co and Ni, the Co concentrations in plant organs were the same as for specimens grown in media containing Co only. However, the Ni levels were lower in both species. Uptake of Co therefore appeared to suppress Ni uptake.Pot trials showed that the order of tolerance was Ni>Cu>Co for A. troodii and Ni>CoCu for Au. saxatilis, whereas the seedling tests showed the order to be Co>Ni>Cu. At metal concentrations 10 000 g g^-1, the overall tolerance of A. troodii was greater than that of Au. saxatilis which exhibited equally low tolerance to Ni and Cu.We conclude that in A. troodii, A. corsicum Duby, A. heldreichii Hausskn., A. murale Waldstein & Kitaibel, A. pintodasilvae T.R. Dudley, and A. tenium Hálácsy, Ni tolerance and hyperaccumulation conveys the same character towards Co. This behaviour should be investigated in other hyperaccumulators of Ni and/or Co.     

Transformation of Brassica oleracea with an S-locus gene from B. campestris changes the self-incompatibility phenotype

Summary An SLG gene derived from the S-locus and encoding and S-locus-specific glycoprotein of Brassica campestris L. was introduced via Agrobacterium-mediated transformation into B. oleracea L. A self-incompatible hybrid and another with partial self-compatibility were used as recipients. The transgenic plants were altered in their pollen-stigma interaction and were fully compatible upon self-pollination. Reciprocal crosses between the transgenic plants and untransformed control plants indicated that the stigma reaction was changed in one recipient strain while the pollen reaction was altered in the other. Due to interspecific incompatibility, we could not demonstrate whether or not the introduced SLG gene confers a new allelic specificity in the transgenic plants. Our results show that the introduced SLG gene perturbs the self-incompatibility phenotype of stigma and pollen.     

Phenotypically normal transgenic T-cyt tobacco plants as a model for the investigation of plant gene expression in response to phytohormonal stress

The tumour-inducing T-DNA gene 4 (T-cyt gene) of the nopaline Ti plasmid pTiC58 was cloned and introduced into tobacco cells by leaf disc transformation using Agrobacterium plasmid vectors. Tobacco shoots exposed to elevated cytokinin levels were unable to develop roots and lacked apical dominance. Using exogenously applied phytohormone manipulations we were able to regenerate morphologically normal transgenic tobacco plants which differed in endogenous cytokinin levels from normal untransformed plants. Although T-cyt gene mRNA levels, as revealed by dot-blot hybridization data, in these rooting plants were only about half those in primary transformed shoots the total amount of cytokinins was much lower than in crown gall tissue or cytokinin-type transformed shoots as reported by others. Nevertheless the cytokinin content in T-cyt plants was about 3 times greater than in control tobacco plants.Elevated cytokinin levels have been shown to change the expression of several plant genes, including some nuclear genes encoding chloroplast proteins. Our results show that the mRNA levels of chloroplast rbcL gene increase in cytokinin-type transgenic tobacco plants as compared with untransformed plants. Data obtained suggest that T-cyt transgenic plants are a good model for studying plant gene activity in different parts of the plant under endogenous cytokinin stress.